Research Associate and Ph.D. Candidate

Room: F 013

Tel. +49 (0)30 314-29481
Fax +49 (0)30 314-79448

e-mail query

Technische Universität Berlin
Department of Aeronautics and Astronautics
Chair for Aero Engines
Secretary's Office F1
Marchstraße 12-14
D-10587 Berlin

• CRC1029 project page: Active flow control of stator cascades at periodically-transient boundary conditions
• Internal project page: Active flow control of stator cascades at periodically-transient boundary conditions

• Surface Flow Visualization Techniques
  M. Eck, R. Rückert, E. Tüzüner, J. Mihalyovics
  Workshop: Near-Wall Flow in Turbomachinery Blade Rows,
  Dresden, Germany, January 28 - 29, 2021,
  https://doi.org/10.5281/zenodo.4493409 .

• 3D Profile Design and Optimization of a Rotor for a Low Speed Axial Compressor Wind Tunnel
  J. Mihalyovics, J. Gambel, D. Peitsch
  Deutscher Luft- und Raumfahrtkongress 2019,
  Darmstadt, Germany, September 30 - October 02, 2019, DocumentID: 490163,
  https://doi.org/10.25967/490163 .

• Numerical and Experimental Investigations for Super Sonic Active Flow Control in the Transonic Mach Regime
  C. Ebert, J. Mihalyovics, M. Staats, D. Peitsch, J. Weiss
  Deutscher Luft- und Raumfahrtkongress 2019,
  Darmstadt, Germany, September 30 - October 02, 2018, DocumentID: 490165,
  https://doi.org/10.25967/490165 .

• A Qualitative Comparison of Unsteady Operated Compressor Stator Cascades with Active Flow Control
  M. Staats, J. Mihalyovics, D. Peitsch
  Active Flow and Combustion Control 2018,
  Berlin, Germany, September 19-21, 2018,
  https://doi.org/10.1007/978-3-319-98177-2_6 .

• Aerodynamic and Experimental Investigations on Optimized 3D Compressor Airfoils
  J. Mihalyovics, C. Brück, M. Meyer, I. Vasilopoulos, D. Peitsch
  ASME Turbo Expo 2018,
  Oslo, Norway, June 11-15, 2018, GT2018-76826,
  https://doi.org/10.1115/GT2018-76826 .

• Experimental Investigations on Highly Loaded Compressor Airfoils with Different Active Flow Control Parameters
  C. Brück, J. Mihalyovics, D. Peitsch
  Global Power and Propulsion Society Forum Montreal 2018,
  Montreal, Canada, May 7-9, 2017, GPPS-2018-54,
  https://doi.org/10.5281/zenodo.1343489 .

• Redesign of an annular low speed wind tunnel
  master thesis, 2020.

• Numerical investigation of the effect of experimentally generated leading edge erosion on the two-dimensional flow in a compressor grid
  master thesis, 2020.

• 3D profile optimization of a compressor rotor blade for an axial low speed compressor test rig
  diploma thesis, 2019.

• 2D design calculations of a compressor profile
  bachelor thesis, 2019.

• Concept development for the protection of highly sensitive pressure sensors in compressor test rigs
  bachelor thesis, 2018.

• Design and validation of an additive-manufactured and evaporator-equipped combustion chamber dome for micro gas turbines
  master thesis, 2018.
  
  

• Konstruktion von Turbomaschinen (since summer semester 2017)

• Gas- und Dampfturbinen (since summer semester 2017)

• current courses on ISIS-platform